The AcryliCon Décor System is a colour-quartz filled, trowel applied coating with extraordinary performance that is ideal for wet or heavily abraded areas where hygiene and cleanliness are required.

Not only does this innovative monolithic system have excellent slip resistance values, longevity and cleanability, but it also provides minimal facility downtime due to its 2-hour curing process. With AcryliCon’s unique ability to chemically bond to itself, the optional coved skirting is completely seamless with the floor.

The AcryliCon Décor System is the best solution for interior and exterior wet environments such as food/beverage processing, commercial kitchens, automotive, transportation platforms and industrial areas with heavy traffic and high compressive strength needs.

The Decor System has very high compressive strength, very high bending and tensile strength and a very high resistance to ageing. Due to the Chemical properties of the Acrylicon resins, each layer (primer, body coat and seal coat) chemically bond together rather than mechanically. This leaves no chance of delamination between layers, or from the concrete.

• Full cure within 2 hours
• 84 N/mm² - 12,180 psi Compressive Strength
• Completely pore free
• Non toxic - Solvent free - VOC-free
• Fully repairable
• No loss of Plasicisers
• Full range of slip resistant finishes available

These properties make it ideal for any industry where hygiene and cleanability are paramount.

Acrylicon Decor System can be delivered with Microban Antibacterial Protection, please read more about Microban under the section "Microban".

The technical properties of your AcryliCon Floor are based on DIN/ASTM testing and the results are average values delivered under proper installation procedures and conditions.
The AcryliCon Systems are fully cured two hours after installation and may be actively used by the customer.
The supplier is not liable for possible property changes of the AcryliCon Systems caused by hot water loads at 68°C/155°F and above and/or thermal shock (rapid temperature variations).

TECHNICAL DATA - CURED PRODUCT